Packard Bell Windows 7 Recovery

Packard Bell Windows 7 Recovery from Desktop

 

Restoring the original factory image erases ALL existing data

 
  
   
Hard Drive Recovery from Desktop

Recovering From Within Windows 7
To reinstall Windows 7 and all pre-installed software and drivers:

1. Click Start, All Programs, Packard Bell, then click Packard Bell Recovery Management. Packard Bell Recovery Management opens.
2. Click the Restore tab, then click Restore system to factory default. The Confirm Restoration dialogue box opens.
3. Click Yes, then click Start. A dialogue box displays information about the hard drive that the operating system will be recovered to.

Caution: Continuing the process will erase all files on your hard drive.

4. Click OK. The recovery process begins by restarting your computer, then continues by copying files to your hard drive. This process may take a while, but a Packard Bell Recovery Management screen shows you its progress. When the recovery has finished, a dialogue box prompts you to restart your computer.
5. Click OK. Your computer restarts.
6. Follow the on-screen prompts for first-time system setup.

Recovering From the Hard Drive During Startup
To reinstall Windows 7 and all pre-installed software and drivers:

1. Turn on your computer, then press Alt + F10 during startup. Packard Bell Recovery Management opens.
2. Click Completely Restore system to Factory Defaults.
3. You will then see the Recovery Notice. This warns you that
* This action will erase all exsisting data on C:
* This option will return your comptuer to factory settings. All files, settings, updates and software installed since the comptuer was first used will be deleted.
* we recommend this recovery is your computer is infected by a persistent virus or malware, or if other recovery options fail.
* Recovery will require plenty of power. Please plug in your AC cord.
* Please detach all external storage device attached to the system. e.g. USB Hard Disk, Flash Disk.
Click Next to continue.
4. You will then get a Restore Destination summary screen. This displays the main hard drive in your computer. Click Next to continue.
5. You will be notifed that:
This action will erase all exsisting data on Partition label : OS.
Press "OK" to continue, or press 'cancel' to abort.
Click OK to continue.
6. Your hard drive's original, factory-loaded contents are recovered. This process will take several minutes. During this time the screen may flash up several messages whilst it automatically configures your computer. Once this has finished press OK to restart your computer.
7. After your computer restarts, Windows will setup your comptuer and configure it for first use.

Recovering From Your Recovery Discs
To reinstall Windows 7 and all pre-installed software and drivers:

1. Turn on your computer, insert the first system recovery disc into your optical disc drive, then restart your computer.

Caution: Continuing the process will erase all files on your hard drive.
2. During startup, press to open the boot menu. The boot menu is where you can select which device to start from, such as the hard drive or an optical disc.
3. Use your arrow keys to select CDROM/DVD, then press Enter. Windows installs from the recovery disc you inserted.
4. Insert the second recovery disc when prompted, then follow the on-screen prompts to complete the recovery.

 

 

 

Hardware links - Internet links - Other links - Software Links - Web Design links

By using this website you are agreeing to this Disclaimer & Legal statement